Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

How to Make Shoes Non-Slip With Hot Glue?

How to Make Shoes Non-Slip With Hot Glue?

Making shoes non-slip can be a challenge, especially if you’re working with materials like leather or suede. However, it’s not impossible! In this article, we’ll provide some tips and reviews of products that can help make your shoes non-slip. Whether you’re looking for a permanent solution or just a quick fix, we’ve got you covered.

Materials For Making Shoes Non-Slip With Hot Glue

The most important material you’ll need for this project is hot glue. You can find hot glue at most hardware stores or online. Make sure to get a good quality glue so that your shoes will be protected from slipping.

In addition to hot glue, you’ll also need:

  • A shoe brush
  • A lint roller
  • Sandpaper (optional) [1]

If you’re working with leather or suede, you may also want to use a sealant to protect the material from the hot glue. We recommend using a waterproof sealant like Scotchgard or something similar.

Steps To Diy Non-Slip Shoes With Hot Glue

Hot glue is the answer if you’re searching for a fast and easy method to make your shoes non-slip. You can find this product in any hardware or craft store, and it’s simple to use.

Identifying the Right Shoes

The first step to making your shoes non-slip is identifying the right shoes. You need to make sure that the shoes you select are made of a material that will allow the hot glue to adhere properly. Leather and synthetic materials work well, but avoid cotton or other natural fabrics as they can be difficult to glue. Once you have selected the right shoes, it’s time to get started on your project!

The next step is to prep your shoes for the hot glue. Make sure they are clean and dry, and remove any laces or other materials that could get in the way. It’s time to begin gluing your shoes after they’re finished.

Identifying the Right Shoes

Hot Glueing

To stop your shoes from slipping, you can glue them to your feet using hot glue. Hot glue is an easy and inexpensive way to make your shoes non-slip. You can buy hot glue sticks at any craft store, and they come in a variety of colors. I prefer clear hot glue because it dries invisible and doesn’t leave a residue on your shoes. [2]

To make your shoes non-slip with hot glue, start by applying a thin layer of glue to the bottom of your shoe. You can use a brush or your finger to apply the glue. Then, sprinkle some sand or grit over the glue. The sand will help to create a non-slip surface on your shoes.

Let the glue dry for 24 hours before wearing your shoes. You can also apply a second layer of hot glue for extra protection against slipping.

Hop & Skip Away

If you want to make your shoes non-slip, here are a few things to keep in mind while using hot glue. To avoid damaging your shoes, be sure to use a low-temperature glue gun. Second, only apply the glue to the areas of your shoes that come into contact with the ground – too much glue can make walking difficult. And finally, always let the glue dry completely before wearing your shoes to avoid any accidents.

With this new hot glue non-slip technique, you can finally say goodbye to those ugly old slip-ons and get stylish shoes that won’t cause you to fall. With just a little bit of effort, you can have fashionable and functional footwear. [3]

Hop & Skip Away

Tips For Diy Non-Slip Shoes Using Hot Glue?

Do you want to know how to make your shoes slip-resistant? If so, you’ve come to the right place. We’ll discuss some of our favorite methods for making shoes non-slip with hot glue in this blog article.

When it comes to making your shoes non-slip, one of the most essential factors to consider is whether or not the spot where you will be applying the hot glue is clean and wet. Any dirt or moisture on the surface of your shoe could prevent the hot glue from adhering properly.

Another tip is to apply the hot glue in thin layers. This will help ensure that the glue dries evenly and prevents any clumping or unevenness.

Finally, be sure to let the glue dry completely before wearing your shoes. Walking around with wet glue on your shoes is not only uncomfortable, but it can also cause the glue to come off prematurely.

We hope you found these tips helpful. If you have any other questions about making your shoes non-slip, feel free to leave us a comment below and we’ll do our best to help you out.

If you’re looking for a more permanent solution, there are a few commercial products on the market that claim to make shoes non-slip. We’ve tried a few of them and can say that they work well and are definitely worth considering if you’re looking for a long-term solution.

One product that we’ve used and liked is called Slip Guard. It’s a spray-on coating that you apply to the bottom of your shoes. Once it dries, it forms a tough, non-slip surface that works great on both carpet and hard floors. [4]

Another option is to buy non-slip shoe pads or insoles. These go inside your shoes and provide a bit of extra traction between your foot and the floor. We’ve found that they work well on both hard floors and carpets.


Does hot glue work as non-slip?

Absolutely! In fact, hot glue is often used as an industrial-strength adhesive for non-slip purposes. It creates a strong bond and can be applied to both smooth and textured surfaces.

If you’re searching for a speedy and straightforward method to make your shoes non-slip, hot glue is the way to go. You’ll also find out how to make your shoes non-slip using hot glue, as well as product reviews and helpful hints in this article.

Does hot glue work as non-slip

What can you put on the bottom of shoes to make them less slippery?

Hot glue is one of the most popular strategies for making shoes less slippery. Hot glue is a substance that can be applied to the bottom of shoes and hardens to create a rough, non-slip surface. We’ll address some frequently asked questions about reducing shoe slipperiness with hot glue in this article, as well as offer some handy suggestions.

Non-slip shoes are not only super easy to make but also inexpensive. You can achieve this by using hot glue! Read on to learn more.

What can I put on my shoes to stop me slipping on ice?

Below are a few things you can add to your shoes to make them slip-resistant. You can either buy special anti-slip shoe grips that fit over the soles of your shoes, or you can make your own DIY shoe grips with hot glue.

If you want to make your own shoe grips, all you need is a hot glue gun and some old socks or fabric scraps. Just cut the fabric into small strips and then use the hot glue gun to attach them to the bottom of your shoes in a crisscross pattern. The fabric will help create traction so you don’t slip on ice.

You can also buy special anti-slip spray that you can apply to the bottom of your shoes. This spray creates a temporary non-slip surface on your shoes that will last for a few hours. It’s perfect for when you know you’ll be walking on slippery surfaces, like ice or wet pavement.

How can I add grip to my shoes?

One way to add grip to your shoes is by using hot glue. You can purchase a hot glue gun and glue sticks at most hardware stores. Simply apply the glue to the bottom of your shoes in a crisscross pattern or other design, and let it dry. By using hot glue, you will create a textured surface that helps to grip onto slippery surfaces and prevent falls.

If you’re worried about the aesthetics of hot glue on your shoes, don’t be! You can easily paint over the dried glue with a matching color of shoe polish or spray paint. Or, if you’re feeling creative, you could even use different colors of hot glue to create a unique design on your shoes. Just make sure that the hot glue is completely dry before you start walking around in them!

Is hot glue grippy?

The short answer is yes, hot glue can most definitely make your shoes grippier and therefore less likely to slip on a variety of surfaces. In fact, many people use hot glue for exactly this purpose!

You can make your shoes non-slip with hot glue using one of a few different methods. One popular method is to simply apply a layer of hot glue to the bottom of your shoes. You can do this by either using a hot glue gun or by applying pre-made dots of hot glue to the bottoms of your shoes.

Is hot glue grippy

How do I make non-slip shoes?

You can make your shoes non-slip in a few different ways. One popular method is to use hot glue. Hot glue is a great option because it is inexpensive and easy to find. You can also use it on a variety of different materials, including leather and fabric.

To use hot glue, start by applying a small amount to the bottom of your shoe. You can either apply it directly to the sole or to a piece of felt or fabric that you have cut to fit the bottom of your shoe. Once you have applied the hot glue, press the sole of your shoe into it and hold for a few seconds. The heat from the glue will help it to adhere better.

If you’re using hot glue on a leather sole, add a thin layer of Vaseline first to prevent the glue from sticking too firmly. This will help to prevent the hot glue from sticking to the leather and making it difficult to remove later.

How do I make my heels less slippery?

If you’re looking for ways to make your heels less slippery, there are a few methods you can try. You can attach paper to wood using hot glue. You can either put some hot glue on the bottom of your shoes or you can put it on the inside of your shoes. Wearing socks with your heels can help to prevent them from becoming slippery. This will help grip the shoes and keep them from slipping off. You can also try wearing tights or leggings with your heels. This will help the earrings stay in place and prevent them from falling off. Finally, if you have heel grips, you can try putting those on your heels. Heel grips are small pieces of rubber or plastic that go over the back of your heel and help to keep your shoe in place.

How can I make my shoes tighter?

One way to make your shoes tighter is with hot glue. Hot glued shoes are easy and quick, but they can be removed just as easily if you decide not to use them again or need more space in the future! Another fantastic option for those who want their footwear fitted perfectly without any hassle of adjustment period required? Shoe laces – these strings attached at both ends so that when pulled taut by each pump action step upon lifting up onto toes ,it creates an uncompromising firm fit around either foot’s contours unlike anything else out there currently available today.

Useful Video: How To Use Glue Guns To Make Slippers Non Slip DIY


That is all there is to it! By following the directions above, you now know how to make shoes non-slip with hot glue. Be sure to carefully follow the instructions and tips above to ensure that your shoes are properly protected. Do you have any other questions or suggestions? In the meantime, feel free to tell us what you think! And, as always, be sure to check out our website for more helpful guides and product reviews. Thank you for reading!


  1. https://5minutecrafts.site/create-clothes/how-to-make-your-shoes-slip-resistant-574/
  2. https://www.instructables.com/Quick-Fix-for-Slippery-Shoes/
  3. https://nextdoorshoes.com/how-to-make-shoes-non-slip-with-hot-glue/
  4. https://themenhero.com/how-to-make-shoes-non-slip/